521,915 active members*
2,150 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Daewoo/Doosan > Need help with steady rest program
Results 1 to 10 of 10
  1. #1
    Registered
    Join Date
    Apr 2018
    Posts
    5

    Need help with steady rest program

    Hi everyone. I've been trying to program to move the steady rest but the M code M58/M59 just don't work in this machine.

    Can you please share your experience programming this?

    TIA

  2. #2
    Member
    Join Date
    Feb 2013
    Posts
    666

    Re: Need help with steady rest program

    Serial number?
    Electrical Edition number?
    Ladder version?

    From that, I can answer anything about why or why not something is happening.
    Doosan Service Technician
    darryl.hardt@doosanmt.com O:973-618-2461 M:973-803-9479

  3. #3
    Registered
    Join Date
    Apr 2018
    Posts
    5
    Quote Originally Posted by dhardt View Post
    Serial number?
    Electrical Edition number?
    Ladder version?

    From that, I can answer anything about why or why not something is happening.
    I found this label behind the machine.

  4. #4
    Member
    Join Date
    Feb 2013
    Posts
    666

    Re: Need help with steady rest program

    Quote Originally Posted by tuantrinh View Post
    I found this label behind the machine.
    That has the machine's serial number. (found on the placard, located near the main power switch)
    That has the Electrical Hardware version. (found on the placard, located near the main power switch)

    What is the ladder version?
    Press the <SYSTEM> hard key
    Press the <PMC> softkey (depending on Fanuc model)
    Press the <PMCPRM> or <PMCCONFIG> (depending on Fanuc model)
    Press the <TITLE> softkey
    There is a field: PROGRAM DRAWING NUMBER (it is in the middle of the page)
    It contains a LONG alphanumeric sequence, separated by a comma or colon...and then another alphanumeric sequence
    I need the WHOLE code...everything in that field.


    From this information, I can see why the machine does anything and everything related to IO
    Doosan Service Technician
    darryl.hardt@doosanmt.com O:973-618-2461 M:973-803-9479

  5. #5
    Member
    Join Date
    Feb 2013
    Posts
    666

    Re: Need help with steady rest program

    Per your electrical manual:
    The option, if purchased, has a right/left independent open-ability, and a separate m-code to clamp/unclamp its brake bar.
    see the m-code list in the first part of your electrical manual.

    If you want to know the output, and the sequence on actions that enable it, I would need the ladder version.
    Attached Thumbnails Attached Thumbnails p5100 steadyrest option.jpg  
    Doosan Service Technician
    darryl.hardt@doosanmt.com O:973-618-2461 M:973-803-9479

  6. #6
    Registered
    Join Date
    Apr 2018
    Posts
    5
    Quote Originally Posted by dhardt View Post
    Per your electrical manual:
    The option, if purchased, has a right/left independent open-ability, and a separate m-code to clamp/unclamp its brake bar.
    see the m-code list in the first part of your electrical manual.

    If you want to know the output, and the sequence on actions that enable it, I would need the ladder version.
    Thank you for the M code chart. M36-39 work just fine.
    Just one more thing, I need to bypass the chuck and tailstock. I know M31 is the one I need but it doesn’t work. I can’t move the tailstock while spindle running

  7. #7
    Member
    Join Date
    Feb 2013
    Posts
    666

    Re: Need help with steady rest program

    I NEED THE LADDER VERSION.
    Doosan Service Technician
    darryl.hardt@doosanmt.com O:973-618-2461 M:973-803-9479

  8. #8
    Registered
    Join Date
    Apr 2018
    Posts
    5
    Quote Originally Posted by dhardt View Post
    I NEED THE LADDER VERSION.
    Here you go boss

  9. #9
    Member
    Join Date
    Feb 2013
    Posts
    666

    Re: Need help with steady rest program

    Reply too intricate for simple post of text, see attached
    Attached Files Attached Files
    Doosan Service Technician
    darryl.hardt@doosanmt.com O:973-618-2461 M:973-803-9479

  10. #10
    Member
    Join Date
    Feb 2013
    Posts
    666

    Re: Need help with steady rest program

    If more information is needed, I recommend that you call my cell number that is listed in my footer.
    (normally use my Office number, but covid-19 has us telecommuting...)
    Doosan Service Technician
    darryl.hardt@doosanmt.com O:973-618-2461 M:973-803-9479

Similar Threads

  1. Need a steady rest
    By FUBAR62172 in forum Want To Buy...Need help!
    Replies: 0
    Last Post: 06-04-2017, 05:09 PM
  2. NEED A STEADY REST
    By FUBAR62172 in forum Want To Buy...Need help!
    Replies: 0
    Last Post: 02-03-2015, 06:14 PM
  3. Steady Rest
    By kstephendaniel in forum Uncategorised MetalWorking Machines
    Replies: 0
    Last Post: 09-12-2013, 11:53 AM
  4. steady rest rollers
    By mattmazak in forum Want To Buy...Need help!
    Replies: 1
    Last Post: 01-24-2010, 01:23 PM
  5. TL-2 Steady rest
    By rbest27 in forum Haas Lathes
    Replies: 10
    Last Post: 04-17-2008, 12:15 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •