Finally has finished my project! I like how this project has turned out. The quality is perfect. Done on CNC Router. Satisfied with the result
Finally has finished my project! I like how this project has turned out. The quality is perfect. Done on CNC Router. Satisfied with the result
Nice! :cheers:
Jim Dawson
Sandy, Oregon, USA
Nice job.I bet it took a lot longer to model that than it took to machine it.
I use 12 mm end mill, 30% step, 3.4 mm depth. For finishing I use TBN (tapered ball nose) 8 mm diameter, 1 mm radius, step 9%. 15000 RPM
The bison - around 12 hours for finishing, around 6 hours for roughing
The bison have 430 mm along the Y axis, around 80 mm along the Z axis
Another masterpiece made by my dad!
It was a gift for a family. Made on CNC 3axis. What do you think?
Beautiful !
Jim Dawson
Sandy, Oregon, USA
I also completed some machine creations.
The bearings purchased from www.bearingkingdom.com are great.
Supply Forever Global Industry Co., Ltd.:https://www.supplyforever.com/