Hi ,
I need to make Dia 6 +0.005/+0.010 dowel pin hole for depth 10mm .The material hardness 50-52 Hrc .Is anyone suggest the Speed, feed and depth of cut for End Mill 4mm
Results 1 to 1 of 1
-
03-31-2020, 08:55 AM #1
- Join Date
- Mar 2020
- Posts
- 1
Dowel pin dimension control in Hardened material.
Reply With QuoteSimilar Threads
-
Question Running A286 hardened material on a Tsugami lathe
By usalbeash in forum Uncategorised MetalWorking MachinesReplies: 0Last Post: 01-04-2018, 04:17 PM -
Milling of induction hardened material
By Thyskie in forum MetalWork DiscussionReplies: 0Last Post: 02-13-2014, 11:21 AM -
Peck Drilling for 3 holes of depth 10mm on hardened material of 35 HRC
By mady_dawn in forum Community Club HouseReplies: 0Last Post: 12-26-2013, 08:00 PM -
Tapping in hardened Material
By machinist77 in forum MetalWork DiscussionReplies: 16Last Post: 04-25-2007, 09:09 PM -
Dowel Pins/Interference Fit/Hardened Plates?
By InspirationTool in forum Mechanical Calculations/Engineering DesignReplies: 8Last Post: 11-09-2005, 02:23 AM
Tags for this Thread
Posting Permissions
