584,863 active members*
4,933 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Mar 2020
    Posts
    2

    K40 problem fresh out of the box!!! Please help!

    I ordered the Mopron/k40 set it all up and when I turned it on the x-axis goes up and won’t stop and I can’t install the whisperer software either. Is anyone out there familiar with this as I’m pretty lost and new to the game. Thanks in advance.

  2. #2
    Join Date
    Dec 2006
    Posts
    124

    Re: K40 problem fresh out of the box!!! Please help!

    For the K40, you can video the problem then contact the manufacturer directly and they will provide support. I have been to their factory and they

Similar Threads

  1. Parts fresh off the SL6
    By Ican in forum Smithy
    Replies: 5
    Last Post: 02-23-2017, 03:57 PM
  2. Fresh Meat! Could use some help.
    By Ski-N-C in forum DIY CNC Router Table Machines
    Replies: 2
    Last Post: 07-06-2015, 05:34 AM
  3. fresh off the nm200
    By ihavenofish in forum Novakon
    Replies: 7
    Last Post: 07-13-2010, 06:31 PM
  4. Fresh thread
    By KeepFire in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 0
    Last Post: 07-29-2008, 08:04 AM
  5. Fresh man report
    By ice in forum Commercial CNC Wood Routers
    Replies: 0
    Last Post: 09-28-2006, 11:45 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •