Fairly rare W/S QCM-6 cnc from a college. Low hours, but very early model GE2000 control. Issues with old boards. I have no copy of source code, so upgrades to control are not an available option. Looking at retrofit using Kflop/Kanalog. Machine has Inland/ Kollmorgan DC brush servos, spindle motor, and drives. Has +-10v analog drive inputs, tach connections on drives. Has 8 wire external encoder on spindle motor, connected to AXS board in control. Has 2, 6 wire connectors on RLV board in control. I assume they go to the x and z axis motors. I ran machine a few years ago. Been sitting a while. Will not power up now, board errors. Drives will move axis' and spindle with 1.5v battery. Does this sound like a good candidate for Kflop/Kanalog? What if the axis motors have resolvers? Machine has 8 station air operated tool turret, hydraulic pump, coolant pump, lots of IO.