584,812 active members*
5,395 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > OneCNC > XR7 Mill Pro and multi vise fixture - help!
Results 1 to 2 of 2

Hybrid View

  1. #1
    Join Date
    Apr 2006
    Posts
    19

    XR7 Mill Pro and multi vise fixture - help!

    I am running a Fadal 3016 with XR7 Mill Pro.
    I have a nice multi vise fixture set up with 6 pcs ready to go and a complicated program to get running.
    I need to use the multi vise, multi offsets type of repeat.

    I am struggling a bit with the Post set up.
    Two things I can't figure out:
    1. The Post automatically starts numbering subroutines starting from 100.
    The Fadal control can only accept subs numbered from 01 to 89.
    Is there a way to fix the sub numbering provided by the Post? Or can I do math within the Post to fix this such as {(RN-99)} instead of {RN}?

    2. The Post puts the main program at the beginning of the NC listing and the subroutines at the end.
    The Fadal control requires the subs to be at the beginning of the listing and the main program to follow the subs.
    Is there a way to control this output to get the subs listed at the beginning?

    Thanks for any help (I'm stuck with manual editing on a giant program if I can't figure this out!)

    RC

  2. #2
    Join Date
    Apr 2006
    Posts
    19

    Re: XR7 Mill Pro and multi vise fixture - help!

    I figured it out.
    Thanks!
    RC

Similar Threads

  1. multi part fixture reference
    By Uman in forum Tormach Personal CNC Mill
    Replies: 6
    Last Post: 03-07-2017, 03:21 PM
  2. Multi Vise Machining
    By kutter in forum CamWorks
    Replies: 6
    Last Post: 04-23-2014, 04:32 PM
  3. Multi-Part Self Adjusting Vise Jaw
    By l u k e in forum Work Fixtures / Hold-Down Solutions
    Replies: 6
    Last Post: 02-19-2014, 06:09 PM
  4. Help with multi-part fixture
    By Pharkas in forum MetalWork Discussion
    Replies: 12
    Last Post: 09-12-2012, 04:07 PM
  5. Multi fixture issues
    By durgam605 in forum FeatureCAM CAD/CAM
    Replies: 3
    Last Post: 07-01-2011, 01:54 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •