584,829 active members*
4,886 visitors online*
Register for free
Login
IndustryArena Forum > Manufacturing Processes > Turning > Mazak QT100SG Alarm 406 - Memory Protect
Results 1 to 3 of 3
  1. #1
    Join Date
    Apr 2020
    Posts
    1

    Unhappy Mazak QT100SG Alarm 406 - Memory Protect

    Hi All,

    I am having some issue with my mazak QT100 smooth C control.

    I am unable to edit or write any new programs as when you try to do so, this alarm comes up saying 'memory protect', I and the other operators of this machine have not set a password and would not know how to even do so. Can anyone help with this issue please.
    Last edited by Lewissherwood; 04-07-2020 at 10:24 AM.

  2. #2
    Join Date
    Sep 2012
    Posts
    215

    Re: Mazak QT100SG Alarm 406 - Memory Protect

    I'm not familiar with this control and may sound stupid but does that control have a key switch on the panel like older machines to stop operators changing programs?
    Regards Bob

  3. #3
    Join Date
    Dec 2017
    Posts
    34

    Re: Mazak QT100SG Alarm 406 - Memory Protect

    Its always the simple things you feel everyone should know. So here are my stupid questions.
    Did you bypass any of the safety locks?
    Is the control in edit mode?
    Did you reset before you tried it? Make sure the program is not still in run mode.
    Is it a G-Code program, or Mazatrol?

    We once had a mazak QT30 that would only run Mazatrol. The company that had the machine before us ordered it that way.
    http://www.heavymetalcnc.com

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •