Hi l am a newbie to the laser world having owned one for just over 4 weeks. I am trying to figure out how I can, engrave at different power, speed and finally cut a material design in a single run?
By this I mean using corel draw to setup the sequence of activities and executing as one job.
Example:
1. Engrave a star at 20% power , speed 100 mm/s
2. Engrave a star at 50% power, speed 150 mm/s
3. Engrave a star at 75% power, speed 200 mm/s
4. Finally cut out rectangle, power 30%, speed 10 mm/s
I could be wrong but my research indicates that I cant do the above in one run! I have to manually do each step.
Can someone help clarify this please?