584,861 active members*
4,717 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Postprocessor for CAM > We make PP's to CAM systems with CLDATA output (ASCII)
Results 1 to 2 of 2
  1. #1

    Cool We make PP's to CAM systems with CLDATA output (ASCII)

    Hello,

    I have read from this Forum-Thread that there is needs for PP's for different CAM systems.
    We are able to make PP's to CAM systems that produce toolpath output as CLDATA (Ascii).
    We have already done about 100 pieces for drilling, milling, turning and MTM machines. Machines have had 2 axis up to 22 axis. Also multi axis synchronization has been involved. We have also done simple NC-code transformation programs like from 5-axis Trumpf laser cutter to Prima 5-axis laser cutter.

    You find us from [email protected] and http://www.titako.fi. We operate in Finland, Northern Europe.
    We are sales partners of http://www.exapt.de EXAPT CAM systems and WorkNC CAM systems.

    Good Eastern to all - despite of Covid-19.
    10.4.2020 Tapio Saarinen

  2. #2

    Re: We make PP's to CAM systems with CLDATA output (ASCII)

    Here again.
    We just made PP's to Fusion360 too !

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •