584,849 active members*
4,123 visitors online*
Register for free
Login
IndustryArena Forum > Employment Opportunity / RFQ (Request for Quote). > Employment Opportunity > .125 thick material quote on waterjet or laser cut
Results 1 to 1 of 1
  1. #1
    Join Date
    Jun 2007
    Posts
    31

    .125 thick material quote on waterjet or laser cut

    I would like to get some quotes on the following attached file. I would like to have a quote for total of 8 parts there are 4 parts in the file but thats right side left side top and bottom. so i need 2 right, 2 left, 2 top, 2 bottom.
    I would like a quote in both brass material and aluminum material at .125 thickness. and an internal radius is allowed for the corners
    thanks
    quotes can be e-mailed to [email protected]
    Attached Files Attached Files

Similar Threads

  1. Cutting thick steel plate
    By Woodenspoke in forum MetalWork Discussion
    Replies: 25
    Last Post: 07-12-2007, 05:58 AM
  2. NEwbie Help, is this too thick for my TIG ?
    By Calico in forum Welding Brazing Soldering Sealing
    Replies: 19
    Last Post: 09-30-2005, 12:16 AM
  3. Cnc Machining 1/8 thick steel sheets
    By ccm in forum Uncategorised MetalWorking Machines
    Replies: 7
    Last Post: 10-28-2004, 08:47 PM
  4. 1/2 thick gantry ends..is it strong enough?
    By bgolash in forum DIY CNC Router Table Machines
    Replies: 2
    Last Post: 10-06-2004, 02:19 AM
  5. How thick is too thick?
    By lookalion in forum Uncategorised MetalWorking Machines
    Replies: 5
    Last Post: 08-30-2004, 08:08 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •