Re: G41/G42 interference
hy mr5now, each time when i had a problem with a compensation code, i have calculated the coordinates, then i went back to the machine, and checked if the machine is outputing those coordinates
error is a line before g41, thus there may be a problem with comp lead-in movement : try to increase the clearence, like at least 5-10 x tool dia; if this does not work, then check the toolpath
why do you repeat G3J18.75 in G90 mode ? kindly
Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg