584,866 active members*
4,909 visitors online*
Register for free
Login
Results 1 to 5 of 5

Hybrid View

  1. #1
    Join Date
    Apr 2020
    Posts
    2

    Miyano jnc45 turret indexing help

    I have a miyano jnc45 with the hydraulic turret and fanuc ot


    Had to take turret out to service now on reassembly it will just keep indexing without stopping

    I have a machine al4, unsure what that is though still waiting for a manual

    Also 52.3 and 53.4 is a 1

    Any ideas what would cause this? I am assuming the encoder but unsure how to check it

    Turret indexed before disassembly

    This is a new old machine so working through some bugs

  2. #2
    Join Date
    Jun 2015
    Posts
    4131

    Re: Miyano jnc45 turret indexing help

    hy they installed you an upgrade, allowing you to cut using the turret indexing motion

    Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg

  3. #3
    Join Date
    Apr 2020
    Posts
    2
    As an update turns out it's the pulse encoder

    Rotate it while it is indexing until you find the right spot, then it will find itself and the indexing will stop and the machine alarm will be resolved

  4. #4
    Join Date
    Dec 2015
    Posts
    170

    Re: Miyano jnc45 turret indexing help

    Hi Toddagr, i need your help regarding Miyano jnc 45 Please PM me. i tried to PM first but you just have off PM you option.

    thanks

  5. #5
    Join Date
    Jun 2018
    Posts
    1

    Re: Miyano jnc45 turret indexing help

    Hi, I got a Miyano JNC45S with Fanuc 0TB controller, unfortunately I missed the Electrical wiring diagrams, ladder diagrams, parameters list. Can any help me by sending the above to my mail [email protected].
    It's been extremely difficult to keep up the machine running without these details.
    Thanks in advance for your help guys.

Similar Threads

  1. Turret indexing
    By rishirocks001rk in forum Turning
    Replies: 8
    Last Post: 04-28-2020, 02:45 AM
  2. Miyano lathe with turret indexing problem.
    By whallnut in forum Fanuc
    Replies: 2
    Last Post: 12-30-2014, 12:18 PM
  3. 1997 Miyano BND-34s3 Turret Not Indexing
    By tight-fit-tools in forum DNC Problems and Solutions
    Replies: 1
    Last Post: 11-06-2012, 08:38 PM
  4. Replies: 1
    Last Post: 06-12-2012, 01:18 AM
  5. NZ Turret Indexing
    By zooloader in forum Mori Seiki lathes
    Replies: 4
    Last Post: 04-18-2012, 05:55 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •