541,820 active members*
3,039 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > BobCad-Cam > question about posting
Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Aug 2019
    Posts
    2

    Post question about posting

    i use bobcad now a year, and i have a little question.

    if i use programs on my milling machine, the machine stops before every new rule.
    i think this problem is in my post because, if a make a program on the machine the machine goes continu without stops.

    can any one help me??

    with kind Regards,

    kevin

  2. #2
    Registered
    Join Date
    Jun 2008
    Posts
    1834

    Re: question about posting

    Does the code from BobCAD have M1 or M0 in it between operations before the tool change.
    What Post Processor are you using?
    Can you put the Post Processor in a Zip file and upload it to here?

    Regards
    Rob

  3. #3
    Member
    Join Date
    Aug 2019
    Posts
    2

    Re: question about posting

    the code from bobcad didn.t have m1 or m0 before the toolchange
    Attached Files Attached Files

  4. #4
    Registered
    Join Date
    Jun 2008
    Posts
    1834

    Re: question about posting

    Quote Originally Posted by wsc-motorsport View Post
    the code from bobcad didn.t have m1 or m0 before the toolchange
    File you attached is corrupted somehow and can`t be opened, please try again.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •