Hi,
I see lots of setting for the 2.2kw 400hz spindle but i’m after the Huanyang settings for a 1.5kw air cooled spindle.
Spindle spec
Voltage 220v,
Current 6.5A 3 Phase
Frequency 300hz
Speed 0-18000rpm
I’m mostly going to be running this between 6000-8000 rpm milling foam but just occasionally I need to run it at 2750rpm, which is not ideal as the internal fan is only operational above 100hz but for a 15min mill in foam should be ok. In hind site I should have bought a water-cooled one but there we are.
Anyone got a nice Huanyang setting chart for this spindle?