Hello,
I have DMG DMU50T with MillPlus CNC control system.
This is 1999 machine and I have used this machine for last 4 years without any significant problems.
During one operation there was an emergency stop due to high tool vibrations.
Just after that, when I power up machine I am getting error:
"Z 50 Setpoint update request too fast" - EN
"Z 50 sollvert zyklus zu schnell" - GE
and I can't clear it and reset to start drives.
What is strange to me, on initial screen I see 0.000 position for X, Y, B and C axes but for Z I see value -22,662 mm - it seems that maybe controller have it somwhere in memmory and try to move ....
Please help, please let me know if someone had similar problem and know the solution.
Thanks in advance.