I got my 107 last week and started hooking it up this morning. I'm to section 2, #6 - "apply power". Since I'm wiring my first VFD here I thought I'd get a double check before I crank on the juice.

What I have

pmdx- 107 ----------> VFD

Agnd ----------> AGND
Aout ----------> AVI
Aref ----------> (nothing)
COM ----------> COM
Fwd/Run ----------> S1
Rev/Dir ----------> S2




VFD manual here - https://www.tecowestinghouse.com/Man...ion_manual.pdf
My main reference pages are 3-10 and 4-11

VFD is connected to motor and works fine using built in keypad.

PMDX-126 is all wired up and working fine moving all axis.


Just looking for a sanity check. Don't want to burn anything up.

Thanks in advance!