584,817 active members*
4,676 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Tree > Journeyman 325 Tree Mill
Results 1 to 5 of 5
  1. #1
    Join Date
    Oct 2016
    Posts
    14

    Journeyman 325 Tree Mill

    Our Journeyman 325 with allen bradley 9 control intermittently drops the tool during machining cycle
    we do not know if we have type 1 2 or 3 spindel

  2. #2
    Join Date
    Oct 2006
    Posts
    60

    Re: Journeyman 325 Tree Mill

    Look up in the taper. Rev 3 has collet with 6 balls and 6mm Allen screw in middle. Rev 2 has a collet with 3 balls and a knock-out button in center past the taper. Rev 1 has 6 pins, 3 each on two different levels past the taper. We rebuild them all. [email protected]

  3. #3
    Join Date
    Oct 2016
    Posts
    14

    Re: Journeyman 325 Tree Mill

    Thank you we will check it out

  4. #4
    Join Date
    Oct 2016
    Posts
    14

    Re: Journeyman 325 Tree Mill

    the was metal chips up inside the collet so we are hoping now its cleaned the tool will not pop out now

  5. #5
    Join Date
    Oct 2006
    Posts
    60

    Re: Journeyman 325 Tree Mill

    Good luck. Shoot me an email if you need anything else!

    [email protected]

Similar Threads

  1. Journeyman 325 tree mill retrofit
    By ramsey321 in forum Tree
    Replies: 13
    Last Post: 09-25-2020, 03:18 AM
  2. USA: WTB Tree Journeyman or other small CNC mill
    By rallyx99 in forum Want To Buy...Need help!
    Replies: 0
    Last Post: 09-21-2018, 03:03 AM
  3. Journeyman 325 tree mill
    By ramsey321 in forum Tree
    Replies: 4
    Last Post: 08-10-2010, 10:19 PM
  4. Replies: 0
    Last Post: 05-21-2007, 01:34 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •