Been looking into a Machine with a flat battery, I have had no luck re establishing Com's through rs232 and WinDNC.
I am using a new null modem Db9 cable with a prolific usb to Db9 adapter with update drivers.
I have also set matching baud rate @115.2K data bits to 8, stop bits to 1 parity to none, Xon Xoff is set to on.
unfortunately WinDNCgives no feed back I relation to com issues it just says transmit failed.
I would like to know of any one has
- install manual for this generation control,
- rs422 pin out as inwould like to try that route.
-any info that may help me establish com's
I have plenty of experience with rs232 and believe I have my ducks in a row maybe a faulty rs232 port or some parameter inhave forgotten ?? Any help would be great.
Sent from my SM-N960F using Tapatalk