521,887 active members*
2,240 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Milltronics > Dorian Smart Dex jamming
Results 1 to 2 of 2
  1. #1
    Registered
    Join Date
    Jun 2007
    Posts
    94

    Dorian Smart Dex jamming

    After a long and frustrating journey , I have finally solved my problem with the turret indexing , or jamming when it gets an M6 command .
    Several years ago I had a situation where the turret would not lock .
    Then I had a problem where the turret would not unlock , and just hum and go into a fault .
    In both cases , it turned out to be the MAC air control valve on the back of the Dorian control box .
    Now wanting to get into too much detail here , but if your MAC valve is hissing when the turret is " at rest " then it is out of adjustment ,
    and will cause all sorts of problems . ( like diverting air to both sides of the locking cylinder ) .
    I will post my maintenence report if anyone is having a similar problem .
    Considering that the MAC valve assembly is pretty cheap , it is worth a try to replace it .

  2. #2
    Member
    Join Date
    Apr 2020
    Posts
    16

    Re: Dorian Smart Dex jamming

    That's good to know, that you are willing to help..!

Similar Threads

  1. aloris or dorian tool holders
    By cob in forum General Other Machine Discussion
    Replies: 1
    Last Post: 03-31-2018, 07:40 PM
  2. Dorian Gang Tool Set-up for Haas TL-1
    By hrdg4me in forum Haas Lathes
    Replies: 1
    Last Post: 03-29-2013, 04:40 PM
  3. Buy Smart Bar Puller,Get Bonus Smart Bar Stopper
    By ARIK in forum News Announcements
    Replies: 0
    Last Post: 03-01-2011, 04:10 AM
  4. Dorian manual turret on a TL2
    By Jonsmach in forum Haas Lathes
    Replies: 18
    Last Post: 02-11-2010, 06:20 PM
  5. Dorian Turret
    By bigbaz in forum General MetalWork Discussion
    Replies: 1
    Last Post: 05-10-2007, 08:18 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •