Is it possible to perform the following tasks with a ruida controller?
1. Set job origin remotely (not at laser cutter control panel) (equivalent of pressing ORIGIN on ruida control panel)
2. Start selected job remotely (job selected from control panel) (equivalenet of pressing START on ruida control panel)
Results 1 to 2 of 2
-
05-19-2020, 04:01 AM #1
Registered
- Join Date
- Apr 2015
- Posts
- 3
ruida / rdworks remote origin and job start
-
05-20-2020, 07:52 PM #2
Registered
- Join Date
- Apr 2015
- Posts
- 3
Re: ruida / rdworks remote origin and job start
I figured this out there is a start/stop option in the RDWorks > Laser work window. You can feed that dialog an *.rd file by clicking UFileOutput and changing the file extension mask to *. Then using the axis move options in the RDWorks > Work window you can move to the position you want. Position must be set to Current Position in the RDWorks > Laser Work window. Here is a screenshot. I use DeskPins to keep the video on top of RDWorks.
Reply With QuoteSimilar Threads
-
How to set origin on Ruida 6442?
By GeneMpls in forum Laser Engraving / Cutting Machine General TopicsReplies: 4Last Post: 03-30-2022, 03:34 AM -
Just installed a RuiDa RDC6442G DSP - Doesn't Return to Origin :s
By RatThing in forum Laser Engraving / Cutting Machine General TopicsReplies: 1Last Post: 01-31-2018, 08:29 PM -
RDworks V8- Ruida 6442, question on attenuating laser power
By GeneMpls in forum Laser Control SoftwareReplies: 0Last Post: 05-22-2016, 08:17 PM -
Remote cycle start
By REVCAM_Bob in forum FanucReplies: 6Last Post: 03-19-2007, 01:08 AM -
Remote cycle start?
By REVCAM_Bob in forum FanucReplies: 0Last Post: 01-20-2007, 05:59 PM
Tags for this Thread
Posting Permissions
