584,863 active members*
4,975 visitors online*
Register for free
Login
Results 1 to 4 of 4
  1. #1
    Join Date
    May 2014
    Posts
    261

    UCCNC G-Code Line Limit?

    Does anyone know if there is a line limit to UCCNC?
    I tried doing some dynamic milling which produced a lot of lines of G-Code for a fairly simple operations, but when I tired to do a few simple things together UCCNC refused to load the code.
    I had to break the operation up into smaller operation files to be able to do it.
    Now I am using an old POS (Point Of Sale) machine that is running Windows XP, so it probably isn't the gruntiest of PCs. Is it a limit of the software or a limit of the PC?
    This is one of three pieces I needed to break it up into to get it to load.
    The other thing is once it was loaded and I tried to jog, it took ages to respond to the command. Like several seconds.
    Attached Thumbnails Attached Thumbnails Part1.jpg  
    If my post is missing an 'nt you might have to add it yourself.

  2. #2

    Re: UCCNC G-Code Line Limit?

    No, there is no line limit to UCCNC.

    Arturo Duncan
    https://cnc4pc.om

  3. #3
    Join Date
    Mar 2003
    Posts
    35538

    Re: UCCNC G-Code Line Limit?

    Older version I think are memory lmited, but there's no hard line number limit.
    The newer 64 bit versions can handle millions of lines of code.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  4. #4
    Join Date
    May 2014
    Posts
    261

    Re: UCCNC G-Code Line Limit?

    Thanks guys. I am in the middle of building a new stand with another PC that supports 64 bit / Win7. So hopefully that sorts out the issues.
    If my post is missing an 'nt you might have to add it yourself.

Similar Threads

  1. Stepcraft 840 stuck axis limit switch UCCNC issue
    By yafimski in forum UCCNC Control Software
    Replies: 0
    Last Post: 12-07-2019, 10:34 AM
  2. Replies: 6
    Last Post: 04-21-2019, 07:16 PM
  3. SolidCAM line, arc, rapid G-code in every line
    By iIsTi91 in forum SolidCAM for SolidWorks and SolidCAM for Inventor
    Replies: 3
    Last Post: 08-13-2018, 06:56 AM
  4. How to make Mach3 go line by line in the g-code?
    By flyingpickles in forum Mach Mill
    Replies: 6
    Last Post: 02-07-2015, 09:18 PM
  5. Replies: 3
    Last Post: 04-08-2011, 01:48 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •