521,626 active members*
1,813 visitors online*
Register for free
Login
IndustryArena Forum > WoodWorking Machines > CNC Machining Centers > Software CNC BIESSE ROVER 30 L2
Results 1 to 2 of 2
  1. #1

    Join Date
    May 2020
    Posts
    1

    Software CNC BIESSE ROVER 30 L2

    Hello, could someone help me? we have a machine rover CNC Biesse 30 L2 year 2000. The hard disk damaged by losing the software. does anyone have a copy of this software for this machine? Thanks in advance.

  2. #2
    Member
    Join Date
    Dec 2012
    Posts
    41

    Re: Software CNC BIESSE ROVER 30 L2

    Hello.

    While I think you may have already contacted Biesse there might be some alternatives.

    I have already retrofitted two ROVER 342 routers. One is shown in the following link.

    https://www.youtube.com/channel/UCqu...kA3ST1Vsg6KgiA

    While it is not as fast as the original system this became an option other than scrap them.

    The system is based on a standard PC (some selection needed as not all can serve this purpose) and commercial components for the logic circuits.

    Some modification is needed to the PLC boards so that they can be used by my system but then again the components replaced are standard parts.

    If you can´t find the software please open a new thread and PM me. Perhaps I can help you get your machine up and running. Please remember that I was talking about, lets stand on the negative side, a speed reduction of 40%.

    Best regards.

Similar Threads

  1. software NC 500 for rover biesse
    By Arias in forum Uncategorised CAM Discussion
    Replies: 5
    Last Post: 05-14-2019, 02:10 AM
  2. BIESSE ROVER 336 XNC 1.2 SOFTWARE
    By EsterSpS in forum CNC Machining Centers
    Replies: 4
    Last Post: 04-25-2017, 12:12 AM
  3. Biesse Rover 22, CAM software
    By lolaalol in forum Uncategorised CAM Discussion
    Replies: 0
    Last Post: 05-24-2016, 02:11 PM
  4. Need Biesse Rover 316 software
    By mar404 in forum Biesse
    Replies: 0
    Last Post: 08-03-2011, 01:50 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •