Can Anyone walk me thru the procedure to get into the side of the parameters on a T32-3 SQT10 MS. I need to locate parameters SP151 and SP152. Thanks for your assistance!!!
TL
Results 1 to 1 of 1
Threaded View
-
05-22-2020, 01:39 AM #1
Registered
- Join Date
- Dec 2008
- Posts
- 8
T32-3 using password 1131 how to use it to get into spindle parameters for C axis
Reply With QuoteSimilar Threads
-
SYNTEC 900ME parameters password
By geast1967 in forum Chinese MachinesReplies: 14Last Post: 07-14-2023, 01:01 PM -
mazak matrix 2 1131
By EJYOUNG72 in forum Mazak, Mitsubishi, MazatrolReplies: 1Last Post: 01-15-2018, 04:32 PM -
Nakamura Tome TMC-200(C axis + sub spindle) parameters lost
By sinad in forum FanucReplies: 4Last Post: 12-16-2017, 09:57 AM -
G141 Sub spindle Z axis questions (parameters)
By Clonekid54 in forum OkumaReplies: 4Last Post: 02-06-2014, 04:59 AM -
LU 15W sub spindle/ Zb axis interference parameters
By Clonekid54 in forum OkumaReplies: 6Last Post: 02-04-2014, 10:50 PM
Tags for this Thread
Posting Permissions
