521,626 active members*
2,215 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Uncategorised CAM Discussion > write feed in gcode file based on line steepness
Results 1 to 1 of 1
  1. #1
    Member
    Join Date
    Mar 2018
    Posts
    1

    write feed in gcode file based on line steepness

    Hello,

    I am looking for a way to edit a gcode file to write the feed rate on every line that is steeper than a certain angle because the machine i work on gives me a error when traveling in Z on faster feeds.

    Thank you.

  2. #2
    Moderator
    Join Date
    Dec 2005
    Posts
    528

    Re: write feed in gcode file based on line steepness

    G Code files are just text files, so pretty much any text editor will work.

    Mark

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •