523,930 active members*
2,674 visitors online*
Register for free
Login
Results 1 to 10 of 10
  1. #1
    Registered
    Join Date
    Jun 2009
    Posts
    20

    Cool Where are all the miyano users?

    I post this as a problem because no miyano posts from users = less resources for miyano users to draw from. I am getting my first new (to me) miyano anc-45s and am very excited by all the new capabilities multi-axis will give to me. More options. less setups. less fixturing. less work for operators spread out over 1 less machine, maybe more in the future. less concentricity issues. lightly attended. Potentially lights out operation. I operated, set-up, and somewhat programmed, mostly edited a bne-51s back in 2003-2006 and though more complicated than other machines, ran very sweet. I had few problems with it, although, honestly, the machine never ran anything but aluminum and brass. But I liked it, a lot.
    So am I missing something here? Because I thought such a cool cnc lathe would be popular on the forums, and I could mingle with other people equally excited about their miyanos. But maybe the machine isn't that popular and I missed that fact. Maybe theres a proplem with them that is so common, so well known, that they haven't earned popularity.
    I was just hoping to glean off of others experience, this forum has helped me learn so many things over the years. It's a shame.
    But anyway, if anybody has any opinions or other imformation they'd like to share about miyano lathes in General, I'd love hear it. Later guys. Feels good being back in the forum. :-)


    Peace Out!! (yeah, I'm 51, and I said it)
    Paulcnc44

  2. #2
    Registered
    Join Date
    Oct 2012
    Posts
    87

    Re: Where are all the miyano users?

    Hi Paul,
    I have several Miyano's in the workshop I ran for over ten years. No a bad machine.
    We had,
    2 BNE34SY
    2 BNE42S
    3 BNE34S
    1 BNE46S
    2 BNE51S
    1 BNC34S
    11 Star sliding heads
    6 Index multispindles (min 32 axis)
    Fanuc Edm
    Mori. 65mm


    Alan

  3. #3
    Registered
    Join Date
    Jun 2009
    Posts
    20

    Re: Where are all the miyano users?

    That's a good sign. Thanks alan. Wanted to make sure i wasn't missing something. Its just really wierd information is so hard to find for miyanos on the internet. Who knows?

    Sent from my SCH-S960L using Tapatalk

  4. #4
    Registered
    Join Date
    Oct 2012
    Posts
    87

    Re: Where are all the miyano users?

    What model do you need info on?


    Alan

  5. #5
    Registered
    Join Date
    Jun 2009
    Posts
    20

    Re: Where are all the miyano users?

    The anc-45s


    Sent from my SCH-S960L using Tapatalk

  6. #6
    Registered
    Join Date
    Oct 2012
    Posts
    87

    Re: Where are all the miyano users?

    Sorry Paul. All lathes.


    Alan

  7. #7
    Registered
    Join Date
    Jun 2009
    Posts
    20

    Re: Where are all the miyano users?

    Thx for the reply alan. Confused me a little though. The anc-45s is a lathe. Were getting one next week.

    Sent from my SCH-S960L using Tapatalk

  8. #8
    Registered
    Join Date
    Jun 2009
    Posts
    20

    Re: Where are all the miyano users?

    Its got an o-tt control thst lets you run 2 programs simultaneously with wait codes, at least as far as I understand.

    Sent from my SCH-S960L using Tapatalk

  9. #9

    Join Date
    Mar 2019
    Posts
    49

    Re: Where are all the miyano users?

    I just bought a Miyano TSV-31 with 900 hours on it, now to get it home.


    Sent from my iPhone using Tapatalk

  10. #10

    Join Date
    Mar 2019
    Posts
    49

    Re: Where are all the miyano users?

    Here is what I just bought but need a manual, uses the Fanuc 21-M control





    Sent from my iPhone using Tapatalk

Similar Threads

  1. Miyano 34t bnc
    By dave barr 1 in forum General Off Topic Discussions
    Replies: 0
    Last Post: 05-31-2014, 07:58 PM
  2. MIYANO BNC-34T
    By dave barr 1 in forum Community Club House
    Replies: 2
    Last Post: 12-05-2013, 03:30 AM
  3. KNC 45 Miyano
    By SGARCIAM in forum Uncategorised MetalWorking Machines
    Replies: 0
    Last Post: 02-03-2010, 08:21 PM
  4. miyano 3T
    By vertix19 in forum Fanuc
    Replies: 1
    Last Post: 10-03-2009, 07:35 PM
  5. Miyano cnc
    By gashbourne in forum Fanuc
    Replies: 3
    Last Post: 02-05-2007, 10:58 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •