Looking for a quote for four simple adapter plates. Machined in aluminum. I have two files attached called part1 and part2. I need 2 each of part1 and 2 each of part2. See attached photo for tapping requirements. Nothing fancy, this is simply an adapter plate to go between linear rail carriages and a Y-axis carriage bed on a 3D printer. These parts are for private use.
Results 1 to 5 of 5
-
05-01-2020, 01:45 AM #1
- Join Date
- May 2020
- Posts
- 2
RFQ- Simple Adapter Plate- Qty of 4
-
05-01-2020, 01:54 AM #2
Registered
- Join Date
- Feb 2018
- Posts
- 21
Re: RFQ- Simple Adapter Plate- Qty of 4
Can you pls send step file to [email protected]....I can't download. Thanks alot.
Sent from my SM-N975U1 using Tapatalk
-
05-01-2020, 02:42 AM #3
- Join Date
- May 2020
- Posts
- 2
Re: RFQ- Simple Adapter Plate- Qty of 4
Check your email. Files sent.
-
05-01-2020, 05:15 AM #4
Registered
- Join Date
- Oct 2009
- Posts
- 23
Re: RFQ- Simple Adapter Plate- Qty of 4
Sir would you please post your contact email or enable private messaging?
We are ready to quote.
Thank you,
-
05-07-2020, 06:16 PM #5
Registered
- Join Date
- Apr 2012
- Posts
- 51
Re: RFQ- Simple Adapter Plate- Qty of 4
I will quote if you provide email or turn on PM.
Reply With QuoteSimilar Threads
-
Designing a face plate adapter for rotary A axis
By Paraquat in forum Mechanical Calculations/Engineering DesignReplies: 0Last Post: 11-27-2018, 10:09 PM -
3 Jaw Chuck and Adapter Plate for 4th Axis
By MetalShavings in forum Tormach Personal CNC MillReplies: 6Last Post: 04-11-2012, 06:48 PM -
adapter plate
By diycnc in forum RFQ (Request for Quote)Replies: 2Last Post: 02-07-2012, 02:31 PM -
adapter plate for 8x12 hf lathe
By ubaldc in forum Uncategorised MetalWorking MachinesReplies: 2Last Post: 01-29-2010, 09:03 PM -
9x20 adapter plate
By Pxsi in forum PollsReplies: 8Last Post: 10-04-2006, 11:32 AM
Tags for this Thread
Posting Permissions
