584,841 active members*
4,402 visitors online*
Register for free
Login
Results 1 to 4 of 4
  1. #1
    Join Date
    Jan 2012
    Posts
    163

    What wire to use?

    Hi,
    I would like to extend my wires for my nema 34 motor, the motor has 6 amps printed on the label and I'm using 60 volt power supple will it be ok to use 18 awg wire?
    Thanks

  2. #2
    Join Date
    Jan 2018
    Posts
    1516

    Re: What wire to use?

    Yes. I'm using the same at 3 metre lengths with GX20 connectors.

  3. #3
    Join Date
    Jan 2012
    Posts
    163

    Re: What wire to use?

    I was worried about 18 awg wire getting hot and melting or starting a fire i was not sure

  4. #4
    Join Date
    Dec 2012
    Posts
    192

    Re: What wire to use?

    Hello.

    I use 16 AWG for up to 6 meters with no overheating at all. Then I use wire nuts for the motor to cable connections.

    Best regards.

Similar Threads

  1. Sodick AG600L Wire EDM - EDM wire rewinds to spool after cut at end of program.
    By nlancaster in forum EDM Discussion General Topics
    Replies: 5
    Last Post: 04-19-2022, 08:02 PM
  2. Mitsubishi FX-10 1997, Problem with wire detection before the wire chopper.
    By Jeff247 in forum EDM Discussion General Topics
    Replies: 0
    Last Post: 10-29-2019, 03:26 PM
  3. Replies: 0
    Last Post: 02-08-2017, 02:24 PM
  4. Mitsubishi wire type setting for zinc coated wire
    By Futurewire in forum EDM Discussion General Topics
    Replies: 2
    Last Post: 01-25-2011, 01:49 PM
  5. power supply size? for multi wire (total 250 inches of wire)
    By DanOSB in forum CNC Wire Foam Cutter Machines
    Replies: 5
    Last Post: 03-02-2009, 11:34 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •