Hi,
I would like to extend my wires for my nema 34 motor, the motor has 6 amps printed on the label and I'm using 60 volt power supple will it be ok to use 18 awg wire?
Thanks
Thread: What wire to use?
Results 1 to 4 of 4
Threaded View
-
05-22-2020, 11:43 PM #1
Registered
- Join Date
- Jan 2012
- Posts
- 163
What wire to use?
Reply With QuoteSimilar Threads
-
Sodick AG600L Wire EDM - EDM wire rewinds to spool after cut at end of program.
By nlancaster in forum EDM Discussion General TopicsReplies: 5Last Post: 04-19-2022, 08:02 PM -
Mitsubishi FX-10 1997, Problem with wire detection before the wire chopper.
By Jeff247 in forum EDM Discussion General TopicsReplies: 0Last Post: 10-29-2019, 03:26 PM -
French cleat wire caddy (cleaning up your spools of colored wire)
By davy182 in forum VideosReplies: 0Last Post: 02-08-2017, 02:24 PM -
Mitsubishi wire type setting for zinc coated wire
By Futurewire in forum EDM Discussion General TopicsReplies: 2Last Post: 01-25-2011, 01:49 PM -
power supply size? for multi wire (total 250 inches of wire)
By DanOSB in forum CNC Wire Foam Cutter MachinesReplies: 5Last Post: 03-02-2009, 11:34 PM
Tags for this Thread
Posting Permissions
