[jmac429]

I had to replace the mother board battery on my Tree mill with Dynapath Delta 50 contol. but how do I enter into CMOS?. the Control has no F1, DEL button. there is no input for a keyboard either. Anyone know the secret?

Please help.

[cngbrick]

Do you have an AT type keyboard or PS2 keyboard with 5 pin DIN adapter to plug into the keyboard port on the bottom of the Delta 50 control?

RT

[jmac429]

my Delta 50 control does not have this adaptor. I searched all over even inside the cabinet.

[cngbrick]

jmac429,

The keyboard connector is on the Delta 50 motherboard. If your control is mounted in the traditional configuration with the cards on the bottom right, the keyboard connector will be on the underside of the control just to the left of the card slots. It should be a 5 pin DIN connector.

You will need an old style PC keyboard with PS2 connector and a PS2 to AT adapter. I can take a picture later if you need.

RT

[jmac429]

I found it!! Awesome! thank you very much.

JM

[cngbrick]

Glad the information was useful. I keep a keyboard inside the cabinet for occasional use.