524,061 active members*
2,257 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Dynapath > need to enter CMOS on Dynapath delta 50
Results 1 to 6 of 6
  1. #1

    Join Date
    May 2020
    Posts
    3

    need to enter CMOS on Dynapath delta 50

    I had to replace the mother board battery on my Tree mill with Dynapath Delta 50 contol. but how do I enter into CMOS?. the Control has no F1, DEL button. there is no input for a keyboard either. Anyone know the secret?

    Please help.

  2. #2
    Registered
    Join Date
    Aug 2011
    Posts
    75

    Re: need to enter CMOS on Dynapath delta 50

    Do you have an AT type keyboard or PS2 keyboard with 5 pin DIN adapter to plug into the keyboard port on the bottom of the Delta 50 control?

    RT

  3. #3

    Join Date
    May 2020
    Posts
    3

    Re: need to enter CMOS on Dynapath delta 50

    my Delta 50 control does not have this adaptor. I searched all over even inside the cabinet.

  4. #4
    Registered
    Join Date
    Aug 2011
    Posts
    75

    Re: need to enter CMOS on Dynapath delta 50

    jmac429,

    The keyboard connector is on the Delta 50 motherboard. If your control is mounted in the traditional configuration with the cards on the bottom right, the keyboard connector will be on the underside of the control just to the left of the card slots. It should be a 5 pin DIN connector.

    You will need an old style PC keyboard with PS2 connector and a PS2 to AT adapter. I can take a picture later if you need.

    RT

  5. #5

    Join Date
    May 2020
    Posts
    3

    Re: need to enter CMOS on Dynapath delta 50

    I found it!! Awesome! thank you very much.

    JM

  6. #6
    Registered
    Join Date
    Aug 2011
    Posts
    75

    Re: need to enter CMOS on Dynapath delta 50

    Glad the information was useful. I keep a keyboard inside the cabinet for occasional use.

Similar Threads

  1. dynapath delta 20
    By AWALTERS21 in forum Dynapath
    Replies: 10
    Last Post: 09-29-2012, 06:52 PM
  2. dynapath delta 20
    By dodgetruck23 in forum Want To Buy...Need help!
    Replies: 0
    Last Post: 10-10-2011, 11:54 PM
  3. Dynapath Delta 40
    By racear*2865 in forum Dynapath
    Replies: 1
    Last Post: 01-10-2010, 02:05 PM
  4. delta dynapath
    By camtd in forum Deckel, Maho, Aciera, Abene Mills
    Replies: 1
    Last Post: 01-13-2008, 06:45 AM
  5. dynapath delta 10 help
    By undertowx in forum General CNC (Mill / Lathe) Control Software (NC)
    Replies: 2
    Last Post: 07-05-2006, 03:49 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •