524,059 active members*
2,300 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > GibbsCAM > Problems with patterns in Gibbscam
Results 1 to 1 of 1
  1. #1
    Member
    Join Date
    May 2020
    Posts
    1

    Problems with patterns in Gibbscam

    I'm having a problem with alignment of shapes that are using the same pattern. Specifically, I'm machining a pallet of 250 acrylic keys and the cap of the keys do not aligned to the flange. This varies on the pallet getting progressively worse the further from the datum. I've run the same program on three different Fadal EMCs and had the same result. Any suggestions

  2. #2
    Member
    Join Date
    Jan 2005
    Posts
    11213

    Re: Problems with patterns in Gibbscam

    Quote Originally Posted by LRafferty View Post
    I'm having a problem with alignment of shapes that are using the same pattern. Specifically, I'm machining a pallet of 250 acrylic keys and the cap of the keys do not aligned to the flange. This varies on the pallet getting progressively worse the further from the datum. I've run the same program on three different Fadal EMCs and had the same result. Any suggestions
    Sounds like you have absolute and incremental mixed up cut and paste part of your program here
    Mactec54

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •