Is there a way to test on the board itself whether the home switches are working. this is on a home built cnc router that I've had for years and just decided to put home switches on it. I just added the spindle to the relay to turn on and off and that works fine. On a side note this is running on cncpro from yeager automation. The attachment is the board I have. Thank!
Greg
Results 1 to 3 of 3
Hybrid View
-
05-31-2020, 12:55 PM #1
Registered
- Join Date
- Jan 2004
- Posts
- 85
5 axis chinese BOB home switch question
-
05-31-2020, 03:11 PM #2
Registered
- Join Date
- Jan 2018
- Posts
- 1516
Re: 5 axis chinese BOB home switch question
For a start. The inputs for home/limits/e-stop & spindle 0-10v output only work if you plug a 12-24v power supply into the 2 connections on the right.
Originally Posted by gv71
The 5v in from the usb only runs the outputs to the drivers.
-
05-31-2020, 03:37 PM #3
Registered
- Join Date
- Jan 2004
- Posts
- 85
Re: 5 axis chinese BOB home switch question
thank you!!!
Reply With QuoteSimilar Threads
-
Y axis not reference - missing home switch on current axis
By mits007 in forum Mach Software (ArtSoft software)Replies: 1Last Post: 05-28-2020, 11:13 PM -
Requested home axis switch is active please.. please fix then home...................
By DrangMFG in forum Mach Software (ArtSoft software)Replies: 2Last Post: 06-29-2018, 08:08 PM -
chinese 6040 home switch
By stallified in forum Chinese MachinesReplies: 0Last Post: 05-07-2014, 01:43 PM -
X2 Z axis home switch mounting.
By TXFred in forum Benchtop MachinesReplies: 11Last Post: 02-19-2011, 02:54 PM -
Limit/Home Switch Question
By JeLC in forum LinuxCNC (formerly EMC2)Replies: 26Last Post: 03-22-2009, 01:08 PM
Tags for this Thread
Posting Permissions
