584,808 active members*
5,243 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Syil Products > Syil Spindle Still No Bueno -
Results 1 to 15 of 15
  1. #1
    Join Date
    Oct 2013
    Posts
    36

    Syil Spindle Still No Bueno -

    Hey All,

    I'm at my wits end with this Syil X4. I've had the spindle board rebuilt, still no movement. Vid here on where I'm at:



    At this point I'd be happy to replace the spindle control (and motor if necessary) Anyone PLEASE!!! Help!

    Anything I haven't tried with my current set up?

    Anyone who has replaced all the guts in your Syil X4?

    Please hook a brother up

    Thanks,

    CE

  2. #2
    Join Date
    Mar 2017
    Posts
    411

    Re: Syil Spindle Still No Bueno -

    duplicate post

  3. #3
    Join Date
    Mar 2017
    Posts
    411

    Re: Syil Spindle Still No Bueno -

    Do you have a photo of the controller card?

    Is it an XMT_DRIVER_1500 like this one?

    https://www.cnczone.com/forums/bench...-sx4-bldc.html

  4. #4
    Join Date
    Jun 2007
    Posts
    3757
    Pictures of PCBs so I know which of the many versions you have. I hAve most if the schematics.
    Your problem is in the big motor controller PCB.
    Can be a simple as e-stop lockout. Most wiring is failsafe so any broken wire will kill it.
    As your display and buttons work small parallel port board and front panel are good.

    Pictures please.
    Super X3. 3600rpm. Sheridan 6"x24" Lathe + more. Three ways to fix things: The right way, the other way, and maybe your way, which is possibly a faster wrong way.

  5. #5
    Join Date
    Oct 2013
    Posts
    36

    Re: Syil Spindle Still No Bueno -

    Neil and Maxspongebob,

    I was hoping you guys would show up! You both have tried to help me before. In fact in the last thread someone recommended the guy I sent the board to for rebuild

    Attachment 443548

    Previous thread.

    https://www.cnczone.com/forums/syil-...ive-motor.html

  6. #6
    Join Date
    Oct 2013
    Posts
    36

    Re: Syil Spindle Still No Bueno -

    When I had everything pulled out that went to the rebuilder....


    Attachment 443550

    If any close up shots will help I can take more pics

    Thank you!

  7. #7
    Join Date
    Jun 2007
    Posts
    3757
    Quote Originally Posted by lockbuilder View Post
    When I had everything pulled out that went to the rebuilder....


    Attachment 443550

    If any close up shots will help I can take more pics



    Thank you!
    I believe your safety relay on main board won't be closing.
    If that is the case you won't have any voltage on the big electrolytics. Be careful. All this stuff is at mains potential.
    I don't have a schematic of your version.
    What is the psrtnumber(s) on all of the boards.

    Each version the idiots got from east-crystal are different because no proper specs for machine. EC don't care, 'cos they they just charge for development cycle again. The rot continues.
    Super X3. 3600rpm. Sheridan 6"x24" Lathe + more. Three ways to fix things: The right way, the other way, and maybe your way, which is possibly a faster wrong way.

  8. #8
    Join Date
    Oct 2013
    Posts
    36

    Re: Syil Spindle Still No Bueno -

    Hey Neil,

    The big board at the bottom is:

    Honcar HBLC-1100-300H-S0018A
    Power Main Board Ver 1.0 2012.05.18

    The little board at the top is:

    Tonman PCF12171 Rev. 1.1

    Thank you!

    Chris E.

  9. #9
    Join Date
    Oct 2013
    Posts
    36

    Re: Syil Spindle Still No Bueno -

    Oh and the A is in parens.......

    Honcar HBLC-1100-300H-S0018(A)

    sorry,

    CE

  10. #10
    Join Date
    Jun 2007
    Posts
    3757

    Re: Syil Spindle Still No Bueno -

    Sorry. Don't recognize any of those numbers.
    Try this: Closest I could find. Look at page 41. Get the Estop wiring correct.

    Ref:

    https://manualzz.com/doc/6958602/x4-plus---syil-america-bench-top-cnc-mills


    Super X3. 3600rpm. Sheridan 6"x24" Lathe + more. Three ways to fix things: The right way, the other way, and maybe your way, which is possibly a faster wrong way.

  11. #11
    Join Date
    Feb 2020
    Posts
    3

    Re: Syil Spindle Still No Bueno -

    Quote Originally Posted by neilw20 View Post
    Sorry. Don't recognize any of those numbers.
    Try this: Closest I could find. Look at page 41. Get the Estop wiring correct.

    Ref:

    https://manualzz.com/doc/6958602/x4-plus---syil-america-bench-top-cnc-mills


    Hey mate could you PM me please. I tried to PM you but it won't let me. Just have a few questions I think you'd be able to help me with.

    Thanks.

    Sent from my Pixel 3 using Tapatalk

  12. #12
    Join Date
    Jun 2007
    Posts
    3757

    Re: Syil Spindle Still No Bueno -

    Quote Originally Posted by Stifffy View Post
    Hey mate could you PM me please. I tried to PM you but it won't let me. Just have a few questions I think you'd be able to help me with.

    Thanks.

    Sent from my Pixel 3 using Tapatalk
    Your pm box must be full. It blocked my send.
    neilw21 at y7mail • com
    Super X3. 3600rpm. Sheridan 6"x24" Lathe + more. Three ways to fix things: The right way, the other way, and maybe your way, which is possibly a faster wrong way.

  13. #13
    Join Date
    Feb 2020
    Posts
    3

    Re: Syil Spindle Still No Bueno -

    Quote Originally Posted by neilw20 View Post
    Your pm box must be full. It blocked my send.
    neilw21 at y7mail • com
    Emailed you mate

    Sent from my Pixel 3 using Tapatalk

  14. #14

    Re: Syil Spindle Still No Bueno -

    Can you guys please share the solution if one was found? I have an X4 style machine but it is older and slightly different but I can't get MACH3 to control the spindle either. Thanks!

  15. #15
    Join Date
    Mar 2017
    Posts
    411

    Re: Syil Spindle Still No Bueno -

    Quote Originally Posted by anime2485 View Post
    Can you guys please share the solution if one was found? I have an X4 style machine but it is older and slightly different but I can't get MACH3 to control the spindle either. Thanks!
    What are the identifying marks on your spindle controller?

    Look here for my solution. https://www.cnczone.com/forums/bench...-sx4-bldc.html

Similar Threads

  1. Syil SX3 Spindle Control
    By Megaplow in forum Syil Products
    Replies: 1
    Last Post: 06-17-2013, 06:34 AM
  2. Syil X7 spindle wont run
    By pdh8953 in forum Syil Products
    Replies: 41
    Last Post: 05-15-2011, 05:15 PM
  3. Replies: 39
    Last Post: 08-07-2010, 04:59 AM
  4. Replies: 6
    Last Post: 05-13-2010, 12:52 PM
  5. Syil SX3 spindle play and fix
    By david_geng in forum Syil Products
    Replies: 2
    Last Post: 08-07-2009, 10:56 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •