584,812 active members*
5,312 visitors online*
Register for free
Login
Results 1 to 5 of 5
  1. #1
    Join Date
    Jul 2018
    Posts
    6248

    UCCNC & AXBB-E combo

    Hi All- I'm designing a new mill and want to use UCCNC and the AXBB-E. I use UCCNC so all good there. Is the AXBB-E all that's needed? I will have XYZ and a slave on X and a slave on Z so need 5 axes. UCCNC has 6 and AXBB-E has 6 I believe. Any suggestions or experience with this? or better options?

    Also I'm looking at the steppers with integrated drivers any experience with these out there?

    https://cncdrive.com/AXBB.html

    https://www.omc-stepperonline.com/is...-12-38vdc.html

    would like it to be a bit higher voltage and lower inductance though...

    cheers Peter

  2. #2
    Join Date
    Aug 2005
    Posts
    1091

    Re: UCCNC & AXBB-E combo

    Hi Peter,
    The ABXX-E is a good choice. It eliminates the need for a breakout board. It has spindle speed built in.

    This is a 4 axis controller I’ve started putting together for a customer.



    I also have some other images on instagram.
    https://www.instagram.com/homann_designs/

    Cheers

    Peter


    Sent from my iPhone using Tapatalk Pro
    -------------------------------------------------
    Homann Designs - http://www.homanndesigns.com/store

  3. #3
    Join Date
    Jul 2018
    Posts
    6248

    Re: UCCNC & AXBB-E combo

    Thanks Peter - Will it do 3 axis with two slaves? Peter

  4. #4
    Join Date
    Aug 2005
    Posts
    1091

    Re: UCCNC & AXBB-E combo

    It does six axes. I’ll have to check if it can have slaves on two of the axes(5 motors in total).
    I can check in the morning.
    Cheers
    Peter


    Sent from my iPhone using Tapatalk Pro
    -------------------------------------------------
    Homann Designs - http://www.homanndesigns.com/store

  5. #5
    Join Date
    Sep 2019
    Posts
    197

    Re: UCCNC & AXBB-E combo

    It can have slaves on x, y and z

Similar Threads

  1. New build using AXBB-e and huanyang vfd
    By Chmexdf5633 in forum Spindles / VFD
    Replies: 4
    Last Post: 04-14-2020, 01:42 AM
  2. Its Aliveeeee my AXBB-E is working
    By curiosity22 in forum Australia, New Zealand Club House
    Replies: 16
    Last Post: 01-31-2020, 01:39 AM
  3. Axbb-e not Lnking to PC through UCCNC (no Blue Light)
    By BigFellaPhil in forum DIY CNC Router Table Machines
    Replies: 2
    Last Post: 01-01-2020, 12:18 PM
  4. my AXBB-E and UCSB are on the way, small annoyance is anyone using axbb with mach3?
    By curiosity22 in forum Australia, New Zealand Club House
    Replies: 11
    Last Post: 05-17-2019, 03:50 AM
  5. New AXBB controller
    By ger21 in forum UCCNC Control Software
    Replies: 37
    Last Post: 03-20-2019, 11:55 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •