584,830 active members*
5,484 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Tree > Magazine Position Problem on Tree VMC-800
Results 1 to 2 of 2

Hybrid View

  1. #1
    Join Date
    Jun 2020
    Posts
    1

    Magazine Position Problem on Tree VMC-800

    We have a VMC-800 Tree Mill with TPC-2100 Control System. We have faced a problem with tool changer that we could not figure it out. The magazine advance 1 step more that what it is supposed to go to. For instance if it is supposed to go to tool number 2, it goes to tool No. 3 and then the control system stops the machine as it recognizes that the tool changer is not in the correct position. So the control recognizes the fault but any time we reset, we will have the exact same problem, I do appreciate if anyone could help us to rectify this.

  2. #2
    Join Date
    Mar 2010
    Posts
    45

    Re: Magazine Position Problem on Tree VMC-800

    sorry hadn't been on in while to respond and just saw this... I have same control on a VMC-750 Tree, not a ZPS machine. Anyway does it cycle through the Tool alignement OK on startup?

Similar Threads

  1. Replies: 4
    Last Post: 12-26-2023, 06:54 PM
  2. Tool magazine home position 640 M
    By celek99 in forum Mazak, Mitsubishi, Mazatrol
    Replies: 3
    Last Post: 03-02-2023, 08:15 PM
  3. Mill plus V520 magazine position error
    By c1awson in forum Deckel, Maho, Aciera, Abene Mills
    Replies: 1
    Last Post: 02-26-2017, 07:39 PM
  4. Tree VMC 1050 magazine reference problem
    By ksanalytical in forum Tree
    Replies: 3
    Last Post: 01-16-2016, 03:08 PM
  5. Tree 1050 magazine reference problem
    By bluechip9 in forum Tree
    Replies: 0
    Last Post: 01-02-2016, 03:22 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •