Hello everyone,
Recently i bought some old Gildemeister MD3iT CNC lathe and i have some problems with spindle.
Problem with machine is that spindle stop working after 1-2 hours, on the monitor there is not any error. After that i turn off machine and turn on after 10-15 minutes and everything is ok, spindle start working.
I got errors on the board, you can see pictures in attachment.
I hope you will help me, I will be very grateful to you.
https://ibb.co/xqT3rWW
https://ibb.co/ZWKfvfL
Sejdo Hasic, Mechanical engineer