584,841 active members*
4,437 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > Servo Motors / Drives > ESS Series 3.0Nm(425oz.in) Nema 24 Integrated Closed Loop Stepper Servo Motor 24-50VD
Results 1 to 2 of 2
  1. #1
    Join Date
    Aug 2020
    Posts
    1

    ESS Series 3.0Nm(425oz.in) Nema 24 Integrated Closed Loop Stepper Servo Motor 24-50VD

    Hi

    First of all, Im new to this but trying to figure it all out by digging the net.

    Im planning to buy a mill to convert to CNC. I have looked at these servo motors and have a few questions, https://www.omc-stepperonline.com/st...c-1000cpr.html

    1. Do I need a closed loop stepper motor driver for this motor or is all that integrated in this motor?

    2. What controller board would work whit these closed loop servos regarding hooking up all the cables for feed back and alrms etc.


    Regards
    Mikael

  2. #2
    Join Date
    Mar 2003
    Posts
    35538

    Re: ESS Series 3.0Nm(425oz.in) Nema 24 Integrated Closed Loop Stepper Servo Motor 24-

    1), Yes, and it needs to be the correct drive for that motor
    2) Feedback would only go back to the drive. What software do you plan on using?
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •