Its not a connector. It is 2 small holes near the LEDs marked GND and +5V and J9.J9? Kflop connector pinouts don't show a J9.
Or you can check +5V and GND on any connector. Be very careful not to short anything.
Results 1 to 20 of 170
Threaded View
-
06-14-2020, 03:51 AM #11
Junior Member
- Join Date
- May 2006
- Posts
- 4045
Re: is the Dynomotion controll as confusing as it seems?
TK
http://dynomotion.com
Reply With QuoteSimilar Threads
-
Use co2 laser machine controll card to controll 30W fiber source
By oneeye in forum Laser Control SoftwareReplies: 2Last Post: 06-12-2020, 05:23 PM -
Confusing breakage
By tbaker2500 in forum Tormach Personal CNC MillReplies: 2Last Post: 09-07-2013, 04:01 AM -
Confusing diagram
By sirevert in forum Stepper Motors / DrivesReplies: 6Last Post: 09-25-2009, 08:57 AM -
DATA BIT 8 AND 7 CONFUSING
By CHANDRU in forum Mazak, Mitsubishi, MazatrolReplies: 0Last Post: 05-24-2009, 11:08 AM -
BobCad-Cam V21.5 is confusing
By jessey in forum BobCad-CamReplies: 3Last Post: 05-24-2009, 10:43 AM
Tags for this Thread
Posting Permissions
