584,829 active members*
5,104 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Mitsubishi controls > Mitsubishi Meldas 500 problem with parameter
Results 1 to 2 of 2
  1. #1

    Mitsubishi Meldas 500 problem with parameter

    I have a question to everyone who knows about this control. (Meldas 500)

    I had a problem with parameter and had to Initialize the control.

    As I also have problem with the rs232 port i can not upload the parameters. so i have to input them by hand. but after i did the Initialization only axis x appear. also in the parameters I just have the rows for the x axis to input the parameter in. y and z don t show.

    As well only 9 out of the 40 pages for the spindle parameter appear.

    Is there a way i can fix this.

    thank you all for any information...

  2. #2
    Join Date
    Nov 2012
    Posts
    361

    Re: Mitsubishi Meldas 500 problem with parameter

    I don't know the answer, but Mitsubishi may have the manuals for your vintage control available for download on their website. On the docs for my M3 control, the information on how to configure the serial port function, baud, stop, parity, are all detailed. It isn't very easy reading, to be honest, but it is there. Sadly, My M3 control is likely not the same as yours 500, so I don't think I can really provide you with further assistance.

    Good luck!
    Alan

Similar Threads

  1. Mitsubishi Meldas M3/L3 system parameter entry
    By MrMetric in forum Dyna Mechtronics
    Replies: 24
    Last Post: 08-25-2023, 01:47 PM
  2. Mitsubishi Meldas 64 parameter backup problem
    By Pete_MP_Mold in forum Mitsubishi controls
    Replies: 4
    Last Post: 07-25-2018, 01:05 PM
  3. Replies: 1
    Last Post: 12-26-2015, 03:39 PM
  4. Dyna Myte/Mitsubishi Meldas 520M/Servo parameter adjust?
    By DynaMyte4400 in forum Dyna Mechtronics
    Replies: 0
    Last Post: 05-09-2014, 03:53 PM
  5. Feeler DT0 with Mitsubishi Meldas M50 parameter loss.
    By dpelivan in forum DNC Problems and Solutions
    Replies: 8
    Last Post: 01-10-2012, 10:48 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •