[jacof]

GOOD DAY GUYS.

GOT A CLIENT WITH A SMALL JENN-WEI CNC LATHE. FANUC O-TD CONTROL,

HAVING PROBLEMS WITH THE SERVO DRIVEN TURRET.(MITSUBISHI SERVO)

FAULT TRACED BACK TO WIRING ON MACHINE.

CLIENT DOES NOT HAVE ANY DRAWINGS FOR HIS MACHINE.

IS THERE ANYBODY ON THE FORM THAT MIGHT ASSIST WITH DRAWINGS?

THX GUYS

[richardfp4]

Hi,

Sorry I can't help you. But we are looking at a second hand Jenn-wey JMY-6020.
Apart from the trouble you have with the machine, is your customer happy with
the accuracy and stability of the machine?
If we would buy the machine and I have drawings I sure can help you.

Thanks

GOOD DAY GUYS.

GOT A CLIENT WITH A SMALL JENN-WEI CNC LATHE. FANUC O-TD CONTROL,

HAVING PROBLEMS WITH THE SERVO DRIVEN TURRET.(MITSUBISHI SERVO)

FAULT TRACED BACK TO WIRING ON MACHINE.

CLIENT DOES NOT HAVE ANY DRAWINGS FOR HIS MACHINE.

IS THERE ANYBODY ON THE FORM THAT MIGHT ASSIST WITH DRAWINGS?

THX GUYS

[jacof]

Hi,

Sorry I can't help you. But we are looking at a second hand Jenn-wey JMY-6020.
Apart from the trouble you have with the machine, is your customer happy with
the accuracy and stability of the machine?
If we would buy the machine and I have drawings I sure can help you.

Thanks

Hi richardfp4

Thank you for the reply.

Yes they are very happy with the machine.

The only trouble we get on this machine , has always been on the Mitsubishi servo turret.

Would appreciate any assistance on drawings if you get with the machine

THX