[rfjr88]

I have no idea how to surface my osrud table. I'm use to running multicam routers. Which is pretty easy to surface. I have very little training with this osrud table.

I have no idea where to start, So any help would be greatly appreciated!!!

How do I set the height on my MDF?

C.R. Onsrud M series model # 4100M12
Using a OSAI controller
Vcarve Pro


Thank you,

[routalot]

I just found this post and sympathise with the problem.The best solution I found was to use the pocket feature and to create a vector,just a touch larger than the spoilboard, to indicate the boundary of the cut.Then just create a pocketing routine to the shape and desired depth.It worked for me.