The touchscreen function of my Tormach-supplied touchscreen monitor (Monoprice P/N 15482; Tormach P/N 35575) has suddenly stopped working. When I run ADMIN TOUCHSCREEN, I get the calibration program (touch here, then here, then here, then here), and the system senses each touch by activating the next, but after touch #4 I am back at the main PP screen with touches still not recognized. Is there some sort of hard reset for the touchscreen that might help?
Thread: touchscreen failure
Results 1 to 3 of 3
-
06-14-2020, 01:48 AM #1
Registered
- Join Date
- Apr 2017
- Posts
- 158
touchscreen failure
-
06-14-2020, 05:15 PM #2
- Join Date
- Nov 2019
- Posts
- 3
Re: touchscreen failure
had same issue on 1.9.4. happened all of a sudden. check usb cable from monitor to computer. I fixed mine by upgrading to 2.0. after upgrade it started working without issues
-
06-15-2020, 12:29 AM #3
Registered
- Join Date
- Apr 2017
- Posts
- 158
Re: touchscreen failure
Unplugging & replugging the cable did the trick. Thanks for reminding me that this is always worth trying.
Reply With QuoteSimilar Threads
-
PP 2.12 ADMIN TOUCHSCREEN
By asterix in forum Tormach PathPilot™Replies: 3Last Post: 08-12-2018, 06:17 PM -
To touchscreen - or not
By wildwhl in forum Tormach PathPilot™Replies: 2Last Post: 01-09-2017, 06:36 AM -
New GUI for touchscreen/no keyboard.
By samco in forum LinuxCNC (formerly EMC2)Replies: 17Last Post: 09-10-2011, 05:42 AM -
Will trade $1200 planar touchscreen for perfect touchscreen front end
By rooflok in forum Mach MillReplies: 1Last Post: 02-10-2010, 07:06 AM -
touchscreen keyboard ?
By dertsap in forum Mach Wizards, Macros, & AddonsReplies: 2Last Post: 02-07-2010, 02:03 AM
Tags for this Thread
Posting Permissions
