[andyco]

I have my VMC 40 for sale. $2,500.00

22x16
10000 rpm spindle
-5 system
4 megs of memory

The machine has air and power and can be inspected. You’re welcome to run a part if you want.

Please let me know if you have any questions

Thank you
Andy

[RCRDarth]

Hi Andy,

I just saw this ad. Where are you located? Can you call me to discuss the machine? Thank you. 724-977-8531

Chuck

Sent from my SM-G892A using Tapatalk

[andyco]

Hi Chuck,

I’m in Santa Maria Ca.

[RCRDarth]

Ok, thanks Andy, I will pass on the machine. I am on the east coast. Good luck with your sale.

Sent from my SM-G892A using Tapatalk

[F221]

Hi Andy,

I have few questions about your machine, if you happen to know.

What is the overall height with the spindle full Z up?
What is the overall height with the spindle full Z down?
When you load a program, is the 4 megs of memory fully usable?
What would you estimate as the status of the turcite on the ways?

Thanks,

Matt

[Cole2534]

The dimension questions can best be handled at this link- https://www.fadalcnc.com/media/pdf/t...tion_Pages.pdf

[F221]

The dimension questions can best be handled at this link- https://www.fadalcnc.com/media/pdf/t...tion_Pages.pdf

Thanks!

[Michael82]

I have my VMC 40 for sale. $2,500.00

22x16
10000 rpm spindle
-5 system
4 megs of memory

The machine has air and power and can be inspected. You’re welcome to run a part if you want.

Please let me know if you have any questions

Thank you
Andy

Is this machine still for sale ? Are you willing to ship it if it is paid for in advanced