Good afternoon, I'm having troubles with reloading parameters back in after battery loss. The problem is that I didn't have reliable copies of my all1 all2 and all3 backup files. I've got original factory parameters from Mori, however once I load them and set x and z zero points I can move the axis, and index the turret, clamp and unclamp the Chuck but I cannot make any MDI commands, it won't insert them, and it shows I have no available space for programs. I'm not really familiar with the control, but I've learned a lot over this ordeal. Any help in the right direction would be much appreciated.
Results 1 to 2 of 2
-
06-19-2020, 05:31 PM #1
- Join Date
- Feb 2020
- Posts
- 1
CL-200 meldas 64 msc-803 reinitialize control
-
10-01-2022, 03:44 PM #2
Member
- Join Date
- Aug 2005
- Posts
- 82
How is you machine recently.
Hope it stay in working condittion.
Reply With QuoteSimilar Threads
-
help.,,,, how to reinitialize M32B
By mantenim in forum Mazak, Mitsubishi, MazatrolReplies: 0Last Post: 11-06-2014, 12:23 AM -
meldas 520 control
By Bada Bing in forum Mazak, Mitsubishi, MazatrolReplies: 0Last Post: 04-29-2013, 06:58 PM -
mazak t32-2 lathe scared to reinitialize.
By neigh in forum Mazak, Mitsubishi, MazatrolReplies: 6Last Post: 05-03-2011, 02:40 AM -
Meldas 300 Control
By camtd in forum Parametric ProgramingReplies: 1Last Post: 02-26-2011, 12:19 AM -
Fanuc 6T. How to reinitialize the memory
By starn36 in forum FanucReplies: 9Last Post: 02-26-2009, 01:20 AM
Tags for this Thread
Posting Permissions
