584,812 active members*
5,550 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Oct 2016
    Posts
    3

    E5 error millplus control

    Hi all, I have a deckel with a millplus V520 control.

    This was out in estop for the weekend. Taking out of estop and enabling the machine I have an E5 error. This points to overloads on the coolant system but all OK. How do I see what's bringing this alarm. Below items have checked out OK. (item 2 not found in schematics)

    E 5 Breakdown coolant/chips transfer
    Symbols:
    1) IX_KM_NEG_MSS_SSA=0

    2) IX_KM_NEG_MSS_Stoerung=0

    3 IX_KM_NEG_MSS_KSA=0

  2. #2
    Join Date
    Oct 2018
    Posts
    11

    Re: E5 error millplus control

    Proximity switch on the swarf conveyor :-)

Similar Threads

  1. Millplus error
    By bassplayerfred in forum Deckel, Maho, Aciera, Abene Mills
    Replies: 2
    Last Post: 11-24-2018, 10:47 AM
  2. Millplus error X15+
    By fsa in forum Deckel, Maho, Aciera, Abene Mills
    Replies: 0
    Last Post: 09-14-2018, 07:31 AM
  3. DMU 50V Millplus error E60
    By paris in forum Deckel, Maho, Aciera, Abene Mills
    Replies: 5
    Last Post: 06-01-2017, 09:46 PM
  4. DMU 80T millplus control
    By klinkcnc in forum Deckel, Maho, Aciera, Abene Mills
    Replies: 0
    Last Post: 01-18-2010, 09:46 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •