Hi everyone,

I am currently building my first CNC machine (PrintNC) and am a total newbie, so please excuse if this question is obvious for you the experts.

Being in the US on 110V 20A circuits, I ordered a Huang Yang 1.5kW VFD/spindle combo online, but "unfortunately" the vendor sent me a 2.2kW combo.

https://prom-electric.ru/media/hy01d523b.pdf

Being borderline for my circuits, I am hoping I can limit the current using the PD142 function to "fake" the rated current of the spindle and reduce to it 13A to get close to 1.5kW, assuming this is what the 1.5kW/110V VFD model should be set at. Is that the correct approach? Any risk the breakers on which the VFD and spindle are individually connected to would trip?

Thanks in advance for your help.