I need help about how to setting 2021 LDINT (Load Inertia)
Because there is a new motor replacement instead of the old motor that is broken After that, Test run the machine. Found that whining at the motor
Ask the Fanuc maker to change the parameter No.2021 LDINT. Initially change from 640 to 300, then test run. No howling on the motor. Therefore would like to ask If using this parameter
when using the machine, will there be any problems?
Old parameter 2021
X1: 640, Y:640, Z1:563, C1:512
New parameter 2021
X1:640, Y:300, Z1:563, C1:512