584,812 active members*
5,255 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Jul 2013
    Posts
    6

    Software for recording

    Hi.What software can be used to record total time of engraving and cutting?
    I want to know precisely how much time my laser tube was used.
    I have some old LaserCut software without this options and if someone know what to look for let me know.

  2. #2
    Join Date
    Dec 2013
    Posts
    5717

    Re: Software for recording

    Why not connect an hour meter to the output relay rather than do it in software.
    Jim Dawson
    Sandy, Oregon, USA

  3. #3
    Join Date
    Dec 2012
    Posts
    192

    Re: Software for recording

    Hello.

    I´m not familiar with your software. Yet if it is Windows based it is possible to run a timer along with your control program. You may have to start the timer manually but that can give you an idea.

    As you were already told adding an hour meter could give you a more accurate result but that means spend money. I myself am rather stingy and wouldn´t buy one unless absolutely necessary.

    On the cheap side, is it possible to time it yourself? I mean there are also timing apps for cell phones. I happen to use one myself.

    Regards.

  4. #4
    Join Date
    Oct 2023
    Posts
    0

    Re: Software for recording

    .

Similar Threads

  1. TL-1 Recording / Saving Conversational Programs
    By mishikwest in forum Haas Lathes
    Replies: 3
    Last Post: 04-10-2014, 06:43 PM
  2. What`s is simultaneous recording in 828D?
    By edufer1 in forum SIEMENS -> Sinumerik 802D/808D/810D/828D/840D
    Replies: 1
    Last Post: 01-21-2013, 02:11 PM
  3. Otomotic recording on pc
    By Selimsalim in forum Parametric Programing
    Replies: 0
    Last Post: 07-11-2008, 09:07 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •