any anyone tell me if the included dynapath post in fusion360 works with the delta10 controller?
here is some sample gcode it generated. i think the program name needs to be added at the beginning but other than that - it should be fine?
N100(T)1001$
N101(T)Face3$
N102(9)M3S10186T1$
N103(9)M8$
N104(0)X19.782Y-16.564$
N105(0)Z37.225$
N106(0)Z27.225$
N107(1)Z22.378F3206.9$
-----removed several hundred lines of code
N640(1)X-18.626Y-22.292$
N641(1)X-18.643Y-22.239$
N642(1)X-18.647Y-22.226$
N643(2)X-20.399Y-22.056I-19.558J-22.504D1$
N644(0)Z37.225$
N645(9)M9$
N646(9)M30$
END