532,326 active members*
3,119 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Philips > Maho MH 600E 6406/400, Memory constants?
Results 1 to 2 of 2
  1. #1
    Registered
    Join Date
    May 2013
    Posts
    1

    Question Maho MH 600E 6406/400, Memory constants?

    Hi People, after a long time I'm trying to get my MAHO MH 600E up and running. Now I'm worried about system memory.
    SW version 6406/400.
    Before I load the constants. so the memory is 20000Kb + -. After loading the constants is 11532kb and that is very little. Don't know what machine constant determines memory redistribution? Or does it turn on BTR mode?
    Thank you in advance

  2. #2
    Quote Originally Posted by pepa4 View Post
    Hi People, after a long time I'm trying to get my MAHO MH 600E up and running. Now I'm worried about system memory.
    SW version 6406/400.
    Before I load the constants. so the memory is 20000Kb + -. After loading the constants is 11532kb and that is very little. Don't know what machine constant determines memory redistribution? Or does it turn on BTR mode?
    Thank you in advance
    Hello,

    You can set the size of the BTR memory in the parameters. It is usaly a small value. I don t know exactly the number of this parameter but you can check by pressing the CONSTANT MEM button then OPERATOR MC. It should not be more than 30kb.

Similar Threads

  1. MAHO 600E
    By swat cat in forum Dynomotion/Kflop/Kanalog
    Replies: 62
    Last Post: 11-30-2020, 09:55 PM
  2. Maho MH 1600S constants
    By viorel23cnc in forum Deckel, Maho, Aciera, Abene Mills
    Replies: 2
    Last Post: 01-25-2020, 08:15 PM
  3. Maho mh 600e
    By Selven1 in forum Deckel, Maho, Aciera, Abene Mills
    Replies: 6
    Last Post: 09-12-2018, 07:39 PM
  4. Maho 600E
    By putzer89 in forum SERVICE FOR CNC-MACHINES
    Replies: 2
    Last Post: 01-31-2011, 10:09 PM
  5. Maho 400E or 600E
    By HKgunslinger in forum Want To Buy...Need help!
    Replies: 0
    Last Post: 11-10-2008, 02:12 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •